Multiflo 3 way taps with AP100 water filter    
  Hot, cold and filtered water - all from the same tap!
   
       
 

Napoli 3 way...
Hot, cold and filtered water, all from the same tap...

Hot, cold and filtered water, all from the same tap. Hot and cold water are available from the control lever on the top of the tap, whilst freshly filtered water has its own separate internal flow way activated by turning the small handle at the base of the tap, to prevent normal and filtered water mixing.





Florence 3 way...
Hot, cold and filtered water, all from the same tap...

Hot, cold and filtered water, all from the same tap. Hot and cold water are available from the longer handle on the right hand side as shown in the picture, whilst freshly filtered water has its own separate internal flow way activated by turning the smaller handle on the opposite side. This prevents normal and filtered water mixing.




Ceramic disc operation
High quality finish
Easy to install
Every tap tested prior to despatch
Positive on/off action
Dual channel swivel spout
Includes AP100 water filter
Includes full installation kit

Click here to see AP100

AP100 with integral on/off valve.


Simply turn the bottom section with label 1/4 turn anticlockwise and the water supply is automatically turned off allowing you to remove the exhausted catridge without water spillage. Reverse the procedure for when installing the new one.

Please note the multiflo are not suitable for bungalow applications with storage tanks in the roof. Minimum of 12psi required.


Technical Information

















Chrome long reach taps

Turin 'click' tap
Comes complete with 1 metre of 1/4 x 1/4 tubing pre-connected and 1/4 x 1/4 push lit connector.
Roman 1/4 turn tap
Comes complete with 1 metre of 1/4 tubing and 1/4 x 1/4
push lit connector.
Milan 1/4 turn tap
Comes complete with 1 metre of 1/4 tubing and 1/4 x 1/4 tubing
push lit connector.